SD-MemoryDrive8/16（SDMD8/16） is the SATA adapter with the RAID controller dedicated for SD memory cards. It turns SD memories to SATA Silicon Disc. It fully utilizes the proprietary serial RAID circuit technology from Zentek to get a tremendous performance of a maximum burst transfer of 100MB/Sec in the case of SDMD16. 　Also, it supports more storage as well as more speed by RAID0 (striping). For SDMD16, it can be used as a mass storage with capacity of up to 32 GB (when used with a 2GB SD memory card). It is recognized as one disk volume with the standard IDE driver since it is HDD compatible. It can be booted up in very high speed when the boot OS installed into this SDMD.
SDMD8: 8 SD memory cards SDMD16: 16 SD memory cards Each model can be high speed mass storage disk.. They can be installed in the 5” device bay using the bundled attachment jigs.

Specifications Product name：    SD-Memory Drive8（8 SD slots）    SD-Memory Drive16（16 SD slots） Product code：   CG-SDMD8 Type A   CG-SDMD8 Type A’   CG-SDMD16 (CG-SDMD8 Type A + Type A’） Supported media：    SD memory card (high speed product      recommended)    meets SD Physical Layer Spec. ver.1.10 Interface：   SATA(customizable to PATA）    *SATA:Serial ATA    *PATA:Parallel ATA Data rate：    Max 100ＭＢ/sec (SDMD16)    Max 80ＭＢ/sec (SDMD8)    *Depends on the characteristics of SD     memory card. Size：    CG-SDMD8：     130.0mm(W)×190.0mm(D)×25.0mm(H)    CG-DMD16：     130.0mm(W)×190.0mm(D)×35.0mm(H) Weight：    CG-SDMD8:approx.200g    CG-SDMD16:approx.400g    *Not including the attachment jig and SD     memory card. Accessory：    Attachment for 5” HDD bay included    *SD memory card sold separately.

CG-SDMD8/16 Configuration SDMD8 is installed with 8 SD slots and can use up to 16 GB (2GB per slot x 8 slots) mass storage for SATA drive. SDMD16 is installed with 16 SD slots and can use up to 32GB (2GB per slot x 16 slots) mass storage for SATA drive.